NASSENHEIDER e.K.
Leipziger Straße 33
01097 Dresden
Deutschland

Tel: +49 (0)351-896691-00
Fax: +49 (0)351-896691-99

info@nassenheider.com

Information about our products

Please, select your product:

 
 

Combo E-XS

              

Fill up 2+ Visco with impeller-pumphead


Article Nr.:  301010
Price:   On request

Delivery time 1 week
Add to Wishlist » View Wishlist »

Bottling of products with pieces up to 7 mm, bottling of cold and hot mediums, bottling of  jam, marmalade, yoghurt (creamy, stirred), pesto, chutney, ajvar, ketchup, barbeque-sauces.

The Product will be aspired directly out out the tank/Kettle with the included silicone-hose with inner-Ø 25 mm (1"). with ther included filling-nozzles your product will be bottled without dripping.

This machine is a pump itself, therefore it will aspire the jam through the hose into the machine.
You can either hang the hose (with the included check-valve) into the pot where you cook the jam/ you prepare your product.
Or, even better, if there is an outlet at the bottom of the cooking-pot. Then you can assemble the hose to
this outtlet and suck it out of the pot.
 
Please note, that the machine is not heated, therefore it may be possible that, when the jam is being filled into the jars, the temperature is too low to be sterile. This happens especially with the smaller jars from 125 ml and less.Therefore we always recommend to sterilize the jam afterwards in a steam-oven etc.!

 

Technical data:

- Bottling-temperature: 1°C and 95°C

- Capacity whhen continuous pumping: 5 Liters/ minute

- Capacity when filling: 250-400 jars (at 350 ml) / hour

- Motor-data: 24 V DC/ 100 Watts

- filling- accuracy: +/- 2 gram (e.g. with a 500 g-jar).

- filling amount adjustable from in 1-gram-steps from 5 gram - 35.000 grams

- Materials (all parts are food-grade):

  - Pumphead-housing-material: POM,
  - impeller: CR (neoprene, wearing part)
  - shaft: stainless steel AISI 304
  - sealing: NBR (wearing part)
  - hose:silicone, fibre- reinforced

As our bottling-system is modular, you can equip the machine with with different components (pumphead/hopper/hose/filling-nozzle) to bottle different products with different viscosities..

Pleasae fill out our Inquiry-form. With these information we will be able to make you an offer for your specific product. 

- Fill Up 2+ Visco (Art.Nr.: 301044)

- "Impeller" pump head - for Fill Up 2 Visco, PETP (Art.Nr.: 302042)

- Impeller, for Impeller- pumpmodule (Art.Nr.: 302005)

- Stand (70 cm hight), with 20 x 40 cm profile (Art.Nr.: 303006)

- Suction hose, Ø 19 x 5 mm, silicone fabric hose (Art.Nr.: 304104)

- Pipe bend 90°, with flange, outer Ø 19 mm (Art.Nr.: 304106)

- Check valve, Ø 19 mm hose diameter (Art.Nr.: 306080)

- Filling pipe with flange, Ø 15 mm, 100 mm length (Art.Nr.: 306042)

- Wedge nozzle, inner Ø 15 mm, hard quality (Art.Nr.: 306013)

- Clamping flange for filling nozzles (Art.Nr.: 306007)

- Wedge nozzle, outer Ø 26 mm, soft quality (Art.Nr.: 306014)

- Wedge nozzle outer Ø 26 mm, hard quality (Art.Nr.: 306015)

- Foot-switch with 5-pin-plug (Art.Nr.: 303029)

- Priming and cleaning pump (Art.Nr.: 306086)

- Glass with adapter (Art.Nr.: 306085)

- Adapter for priming pump (Art.Nr.: 306069)

    - Turntable Ø 100, single version (Art.Nr.: 303013)

    - Turntable Ø 100 with sorter rake (Art.Nr.: 303014)

    - Turntable Ø 65 cm/ 26" mini (Art.Nr.: 303017)

    - Stand (70 cm hight), with 20 x 40 cm profile (Art.Nr.: 303006)

    - Funnel 4,5 l / 1 gal (Art.Nr.: 305001)

    - Funnel/ container, 14 l, 60° (Art.Nr.: 305014)

    - Funnel/ container, 25 l, 60° (Art.Nr.: 305002)

    - Microswitch, for jar positioning bracket, long cable version (Art.Nr.: 307053)

    - Combo E-S (Art.Nr.: 301039)

    - Combo E-M (Art.Nr.: 301037)

    - Combo E-L (Art.Nr.: 301038)

     

    Copyright © 2010-2016 NASSENHEIDER e.K.