NASSENHEIDER e.K.
Leipziger Straße 33
01097 Dresden
Deutschland

Tel: +49 (0)351-896691-00
Fax: +49 (0)351-896691-99

info@nassenheider.com

Information about our products

Please, select your product:

 
 

Combo L-S

              

The Fill up 2+ liquid basic set for filling many liqiuids of low viscosity like aqueous solutions, vegetable oil etc. from a viscosity of about 150 mPa*s and a filling temperature of approx. 5-50 °C.

For higher temperatures up to maximum 95°C, the special hot filling gears article 302021 are required.

Please have a look at the data sheet for further specifications!


Article Nr.:  301020
Price:   On request

Delivery time 1 week
Add to Wishlist » View Wishlist »

 

Filling of the following products:

propolis solution, liquor, milk, liquid yoghurt, mead and wine, schnaps, fruit juice, smoothies, water and aqueous solutions, vegetable and mineral oil, liquid syrup

 

Dosing machine and pump

Our filling machine Fill Up Liquid was developed specifically for the dosing and pumping of liquid products like oils and aqueous solutions.
It is the ideal machine for small to middlesized grocery manufactures, oil mills, cosmetics producers as well as wage bottlers, that have to fill smaller batches of many different products.

Compact measures enable a flexible set-up even when there is not much space.
The machine has sophisticated electronics. They enable an effective work-flow with an enormous range of settings.
It is possible to link different sensors or controls of external motors/ devices to the machine. This way it can be easily incorporated into already existing fully automatic filling lines.

When your company grows, our machine can grow as well: we offer automatic turntables and belt conveyors for later expansion.
You purchase a definitely future-proof machine!

 

More specifications:

- many common nominal filling amounts are preprogrammed; display of all filling amounts in milliliters (ml), ounces (oz) or grams (g)
- with very high filling repetition accuracy. This way you can safe great amounts of your products if you, up until now, have always fillid in an extra amount for assurance.
Because of this the pump will shortly have payed itself off.

 

Multiple connection possibilities

For suction of the liquid a check valve (enclosed) is assembled to the suction hose and the pump head is filled with the liquid. Prepared this way, the machine can suck in the liquid (depending on the liquid) from up to 1 m. This way tanks can be emptied easily from above. During this, the fluid level of the liquid always has to be lower than the filling nozzle. A feed of liquid from above is not working.

 

Technical data:

- recommended filling-amount: from 25 ml to 2 Liters (possible filling amount from 5 ml to 65 liters)

- filling of liquids with a dynamic viscosity η of up to 150 mPa·s

- filling repition accuracy of e.g. +/- 1-2 ml at 500 ml

- filling speed of e.g. 350 bottles á 1000ml/ hour (for water)

- height of the bottles: up to 350 mm

- minimal inner-Ø of the bottle-opening: 15 mm (less diameter are possible with additional parts)

- capacity of up to 9 Liters / min at full speed pumping (with water)

- variable motor-speed from 160/min - 3000/min

- motor and control unit work with 24 VDC

- to be connected to 210/110VAC by meansd of a transformer

Module:

- Fill Up 2+ Liquid with gear pump "S" (Art.Nr.: 301003)

Connection parts:

- Clamp for Fill Up liquid (Art.Nr.: 306023)

- Stand (70 cm hight), with 20 x 40 cm profile (Art.Nr.: 303006)

- Bent pipe, pipe socket 90° (Art.Nr.: 306025)

- Silicone fabric hose Ø 14 x 4,5 mm (Art.Nr.: 304044)

- Check valve Ø 15 mm, as intake-cage, stainless-steel (Art.Nr.: 306047)

- Hose clamp stainless steel with handhold, size 24 (Art.Nr.: 304064)

- Power adapter 230 V (Art.Nr.: 307014)

External switch:

- Foot-switch with 5-pin-plug (Art.Nr.: 303029)

Bottling parts:

- Wedge nozzle, inner Ø 10 mm, soft quality (Art.Nr.: 306011)

- Wedge nozzle, inner Ø 15 mm, soft quality (Art.Nr.: 306012)

- Pipe socket Ø 10 mm, 50 mm length (Art.Nr.: 306017)

- Pipe socket Ø 15 mm, 50 mm length (Art.Nr.: 306018)

- Mesh-nozzle Ø 10 mm (Art.Nr.: 306033)

- Mesh-nozzle Ø 15 mm (Art.Nr.: 306034)

- Priming and cleaning pump (Art.Nr.: 306046)

Positioning:

- Centering bar (Art.Nr.: 303112)

    - Gear pump head "S" for the Fill Up Liquid, PVDF (Art.Nr.: 302006)

    - Filling set for Fill up liquid for gear pump "S" (Art.Nr.: 304126)

    - Check valve Ø 15 mm, with intake-filter, plastic (Art.Nr.: 306053)

    - Float container (Art.Nr.: 304039)

    - Skew gears for the Fill Up Liquid (cold) (Art.Nr.: 302019)

    - Skew gears for the Fill Up Visco (hot) (Art.Nr.: 302021)

    - Combo S-L (Art.Nr.: 301013)

    - Combo S-M Visco (Art.Nr.: 301014)

    - Combo S-M + (double pump head) (Art.Nr.: 301043)

    - Combo S- turntable with Fill up 2+ visco, double peristaltic pump head -M- (Art.Nr.: 301035)

    - Combo F-M Liquid (Art.Nr.: 301024)

    - Combo F-L Liquid (Art.Nr.: 301026)

     

    Copyright © 2010-2016 NASSENHEIDER e.K.